ISD 2 Independent Channels Isolated Universal Signal Converter/Conditioner/Isolator

The Din Rail converter is user configurable with the software and interface cable URC-1020. The is user-friendly software. The latest release version can be download free from website.
Interface cable consist of interface converter and USB plug. It can be purchased separately from

supplier. During configuration the converter can work alone without connecting to a power source.

Specification
Input	Thermocouple (T/C) : industry standard thermocouple types J, K, T, E, B, R, S, N, C (ITS-90).
	Pt100 : Excitation 180uA. 2 or 3 wire connection (ITS-90 α =0.00385).
	Voltage : -60mVdc to 60mVdc or –10Vdc to 10Vdc.
	Current : 0-24mAdc
Accuracy	Refer to Table 1 Input Signal
A/D Resolution	16 bits
Input Sampling Rate	<200 ms
Power Supply	DC 18~36V
Power Consumption	1.7W (max)
Output	Current Output : 4~20mA( Resistive load 600Ω max.)
Output	Continuous Voltage Output : 0~10V…( Resistive load 600Ω min.)
Output Resolution	0.6 μ A(15 bits)
Output Response Time	<200 ms
Common Mode Rejection Ratio (CMRR)	>80 dB
Electromagnetic Compatibility (EMC)	En 50081-2, En 50082-2
Galvanic Isolation	2.8 KV. between input and output
Operating Temperature	-10 to 50°C
Humidity	0 to 90% RH
Dimension	75mm(W)x87mm(H)x18.5mm(D)

Table 1 Input Signal
Input signal	Maximum Range	Accuracy
Thermocouple J	-50 to 1000°C (-58 to 1832°F)	± 1°C
Thermocouple K	-50 to 1370°C (-58 to 2498°F)	± 1°C
Thermocouple T	-270 to 400°C (-454 to 752°F)	± 1°C
Thermocouple E	-50 to 700°C (-58 to 1292°F)	± 1°C
Thermocouple B	0 to 1750°C (32 to 3182°F)	± 2°C (Note1)
Thermocouple R	-50 to 1750°C (-58 to 3182°F)	± 2°C
Thermocouple S	-50 to 1750°C (-58 to 3182°F)	± 2°C
Thermocouple N	-50 to 1300°C (-58 to 2372°F)	± 2°C
Thermocouple C	-50 to 1800°C (-58 to 3272°F)	± 2°C
Pt100	-200 to 600°C (-328 to 1112°F)	± 0.2°C
mV	-60mV to 60mV	± 0.01mV
Voltage (Note2)	-10 to 10Vdc	± 1mV
Current (Note2)	0 to 24mAdc	± 10μA

Note 1: Accuracy is not guaranteed between 0 and 400°C (0 and 752°F) for type B

Note 2: The internal DIP switch should be set

Loop Power Signal Transmitter

Model	Type	Input					Output	Isolated
Model	Type	T/C	PT100	mV	mA	V	Output	Isolated
IST-H	Head Mount	V	V	V	X	X	4-20mA	V
IST-D	DIN Rail	V	V	V	V	V	4-20mA	V
IST-P	Head Mount	0-60KΩ					4-20mA	V
NST	Head Mount	V	V	V	X	X	4-20mA	X

Dual Channel Isolated Signal Converter

Model	Type	Input					Output 1	Output 2	Math Function	Independent Input(*Note)
Model	Type	T/C	PT100	mV	mA	V	Output 1	Output 2	Math Function	Independent Input(*Note)
ISC-D	DIN Rail	V	V	V	V	V	0-24mA/0-10V	0-24mA/0-10V	V	X
ISC-C	DIN Rail	V	V	V	V	V	0-24mA/0-10V	RS485	V	X
ISD-D	DIN Rail	V	V	V	V	V	0-24mA/0-10V	0-24mA/0-10V	X	V
ISD-C	DIN Rail	V	V	V	V	V	0-24mA/0-10V	RS485	X	V
ISA-D	DIN Rail	X	X	V	V	V	0-24mA/0-10V	0-24mA/0-10V	X	V
ISA-C	DIN Rail	X	X	V	V	V	0-24mA/0-10V	RS485	X	V

*Note:

ISD/ISA: Different input type can be set to each channel
ISC: Both channels must be set to same input type

Related Products